fashion show stage equipment runway truss
Aluminum trusses are also called trusses, truss stands. It is a kind of system which is widely used in performance exhibition, event celebration, background arrangement, lighting and sound suspension system, which is made of 6061-T6 aluminum cutting, processing, welding, polishing and painting. Can be built according to the venue, build a variety of large and small different specifications of the truss system, and can be customized according to the specific requirements of a flexible combination. Light weight, easy to build and transport, the maximum span can reach more than 30 meters, aluminum compression and corrosion resistance and strong ability.
Product Specifications:
Small truss specifications: 200mm * 200mm / 250mm * 250mm
Medium Truss Size: 300mm * 300mm / 350mm * 350mm / 400mm * 400mm / 450mm * 450mm
Large Truss Size: 400 * 600mm / 500mm * 600mm / 520mm * 760mm / 600m * 760mm, etc.
Product Material: GB 6061-T6 in charge 50 * 3mm material thickness and specifications can be customized
Truss classification: according to the shape can be divided into four square (angle) frame, tripod and shaped frame. According to the installation category can be divided into plug-type truss and screw-type truss.
A complete set of aluminum alloy truss system: mainly by a variety of different lengths, different specifications of the aluminum alloy truss, base, anti-head, oblique support, square sets, cross, hoist, harness. To build a combination.
Light frame installation steps
1, first in the ground at the approximate position of the four base, adjust the following legs, so that in a horizontal plane;
2, in the four corners on the outside of the base into the diagonal support under the part;
3, the anti-head fixed with screws on the base;
4, in the anti-head sets of sets;
5, the beam on the ground to connect up;
6, the two ends of the beam and the two sides of the two sets of docking, then the beam part of the assembly are completed on the ground;
7, the column trusses lying on the connection, and then one end of the screw in the anti-head, the other end of the screw on the cross, while the hanging hoist and cross-linked links, the role of gourd is used to enhance the following beam truss ;
8, together with the column truss slowly put up, pay attention not to force too much to push the column, and then fixed the anti-head above the screws;
9, stand up after the hanging hoist under the hook hook through the harness below the beam;
10, each person is responsible for a column together slowly dragging hanging hoist to pull the beam to the person's head around the position;
11, installed in the beam above the light and sound equipment;
12, each person is responsible for a column together to pull the hanging hoist to a predetermined height to stop;
13, the oblique support of the end and the column tightened, the other end and the base of the horizontal support tightened, so that the aluminum frame was built to complete.
Audited Supplier 
){kind=link}
){kind=link}