Newest 60w rgbw 4in1 led beam moving head light
Introduction
Features
1pcs RGBW4in1 60W led
Beam angle:5 degree
Pan:540°or infinite rotating(16bit accurate scan
Tilt:360° or infinite rotating
Strobe:1-25times/sec or random strobe
Variable electronic dimmer (0-100%).
LCD display
Pan/tilt inverts option.
English and Chinese language option
Reset to factory settings option
DMX channel
| Channel |
Function |
| 1 |
Pan |
| 2 |
Pan infinite rotate control |
| 3 |
Pan fine |
| 4 |
Tilt |
| 5 |
Tilt infinite rotate control |
| 6 |
Tilt fine |
| 7 |
Pan & tilt speed |
| 8 |
Dimmer |
| 9 |
Strobe |
| 10 |
Red |
| 11 |
Green |
| 12 |
Blue |
| 13 |
White |
| 14 |
Effect of static perform |
| 15 |
Effect of move perform |
| 16 |
Lighting show speed |
| 17 |
Marco |
| 18 |
Reset |
Setup
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Maximum recommended serial data link distance: 500 meters (1640ft).
Maximum recommended number of fixtures on a serial data link: 32 fixtures.
MORE INFORMATION PLEASE CONTACT Jamie:
Thanks
Audited Supplier 
){kind=link}